In the automotive industry, ensuring the performance, reliability, and durability of vehicles under various environmental conditions is of utmost importance. Temperature and humidity can significantly impact a car's components, from the engine and electronics to the interior comfort systems. Our large - capacity automotive temperature humidity test chamber for whole cars is a specialized and essential tool designed to meet the rigorous testing needs of the automotive sector. This advanced chamber allows manufacturers to subject entire vehicles to a wide range of temperature and humidity conditions, simulating real - world driving scenarios and enabling comprehensive evaluation of vehicle performance.
The most prominent feature of this test chamber is its large - capacity interior, specifically designed to accommodate whole cars. With dimensions carefully engineered to fit various vehicle types, including sedans, SUVs, and even some light commercial vehicles, the chamber provides ample space for the vehicle to be fully tested. The interior layout is optimized to ensure proper air circulation around the vehicle, allowing for uniform temperature and humidity distribution, which is crucial for accurate testing results.
Equipped with state - of - the - art temperature and humidity control systems, the chamber offers exceptional precision. The temperature can be accurately adjusted within a broad range, typically from - 740°C to 150°C, with a precision of ±0.5°C. Humidity levels can be controlled from 10% to 95% relative humidity (RH), with an accuracy of ±3% RH. This high level of control enables manufacturers to simulate a wide variety of environmental conditions, from the freezing cold of arctic regions to the hot and humid climates of tropical areas.
The test chamber is capable of simulating a diverse range of real - world driving scenarios. It can replicate the temperature and humidity changes a vehicle might experience during a long - distance journey, from a cold start in the morning to driving through a humid rainforest or a hot desert. Multiple test modes are available, including cyclic testing, where the temperature and humidity are repeatedly varied in a predefined pattern to mimic the changing conditions over time. Custom - programmed test sequences can also be created to simulate specific driving routes or usage patterns, providing a more realistic testing environment.
A sophisticated monitoring and data logging system is integrated into the test chamber. Real - time sensors are placed throughout the chamber and on the vehicle itself to monitor various parameters, such as temperature, humidity, air pressure, and the performance of different vehicle systems. The data is continuously logged at high frequencies, allowing for detailed analysis of how the vehicle responds to different environmental conditions. This data can be used to identify potential weaknesses in the vehicle's design, such as components that are prone to failure under extreme conditions, and to make informed decisions for product improvement.
Built to withstand the rigors of continuous use in an automotive testing environment, the chamber features a durable and robust construction. The exterior is made of high - quality, corrosion - resistant steel that provides excellent protection against physical damage and environmental factors. The interior is lined with materials that are resistant to heat, moisture, and chemicals, ensuring a long - lasting and reliable testing environment. The components of the temperature and humidity control systems are selected for their durability and reliability, and are designed to operate continuously for extended periods without breakdown.
Safety is a top priority in the design of the test chamber. It is equipped with a comprehensive set of safety features to protect the vehicle, the testing equipment, and the personnel. These include over - temperature and over - humidity protection systems, which automatically shut down the chamber in case of abnormal conditions. Fire suppression systems are also installed to prevent potential fires, and emergency stop buttons are located throughout the chamber for quick and easy activation in case of an emergency.
| Model |
THC-225 |
THC-408 |
THC-800 |
THC-1000 |
| Inside dimension(W x D x H) mm |
50 x 75 x 60 |
60 x 85 x 80 |
100 x 100 x 80 |
100 x 100 x 100 |
| Outside dimension(W x D x H) mm |
75 x 165 x 170 |
85 x 175 x 190 |
125 x 190 x 190 |
125 x 190 x 210 |
| Internal material |
#304 Stainless Steel |
| External material |
Powder coated #304 Stainless Steel |
| Temperature range |
+ 150℃~ - 70 ℃ |
| Humidity range |
5% ~ 98% R. H |
| Temperature resolution ℃ |
0.01 |
| Humidity resolution % R. H. |
0.1 |
| Temperature stability ℃ |
±0.3 |
| Humidity stability % R. H. |
±2 |
| High temperature ℃ |
100 |
100 |
100 |
100 |
| Heating time (min) |
20 |
30 |
30 |
30 |
| Low temperature |
0, -40, -70 |
0, -40, -70 |
0, -40, -70 |
0, -40, -70 |
| Cooling time (min) |
20, 50, 70 |
20, 50, 70 |
20, 50, 70 |
20, 50, 70 |
| Air circulation system |
Mechanical convection system |
| Cooling system |
Imported compressor, fin evaporator, gas condenser |
| Heating system |
Sus304 Stainless steel High-speed heater |
| Humidification system |
Steam Generator |
| Humidification water supply |
Reservoir, Sensor-controller solenoid valve, recovery-recycle system |
| Controller |
Touch panel |
| Electrical power requirements |
Please contact us for requirements of specific models |
| Safety device |
Circuit system load protection, compressor load protection, control system load protection, humidifier load protection, overtemperature load protection, fault warning light |
By subjecting whole cars to a wide range of temperature and humidity conditions, automotive manufacturers can identify and address potential performance issues early in the design and development process. This allows for the optimization of vehicle components, such as engines, transmissions, and air conditioning systems, to ensure they perform at their best under different environmental conditions. The ability to simulate real - world scenarios helps in improving the overall driving experience for customers, as the vehicle will be more reliable and comfortable in various climates.
Testing vehicles in a controlled environment helps manufacturers evaluate the durability of different components and materials. The chamber's ability to replicate extreme temperature and humidity conditions allows for the identification of parts that may be prone to wear, corrosion, or failure over time. By addressing these issues before mass production, manufacturers can improve the long - term durability of their vehicles, reducing the need for costly repairs and recalls.
The automotive industry is subject to numerous international and national regulations regarding vehicle performance and safety under different environmental conditions. Our test chamber enables manufacturers to conduct the necessary tests to ensure compliance with these regulations. By providing accurate and reliable test data, manufacturers can obtain the required certifications and approvals, facilitating the sale of their vehicles in different markets around the world.
Early detection of potential problems through comprehensive testing in the chamber can save manufacturers significant costs. By identifying and fixing issues before mass production, manufacturers can avoid costly product recalls, warranty claims, and customer dissatisfaction. Additionally, the ability to optimize vehicle components based on test results can lead to cost savings in terms of materials, manufacturing processes, and energy consumption.
In a highly competitive automotive market, the ability to offer vehicles that perform well in a variety of environmental conditions is a significant competitive advantage. By using our large - capacity temperature humidity test chamber, manufacturers can differentiate their products from competitors by ensuring their vehicles are more reliable, durable, and comfortable in different climates. This can help attract more customers and increase market share.
During the development of new vehicle models, manufacturers use the test chamber to evaluate the performance of prototypes under various temperature and humidity conditions. This includes testing the engine's performance, the efficiency of the air conditioning system, the functionality of electronic components, and the durability of interior materials. The test results are used to make design improvements and ensure that the final product meets the desired performance and quality standards.
In addition to whole - vehicle testing, the chamber can be used to test individual vehicle components. Manufacturers can subject components such as batteries, sensors, and wiring harnesses to extreme temperature and humidity conditions to evaluate their performance and reliability. This helps in selecting the best components for use in the vehicle and ensuring that they will function properly in different environments.
In the manufacturing process, the test chamber is used for quality control purposes. A sample of vehicles from each production batch is tested in the chamber to ensure that they meet the specified quality standards. The precise control of temperature and humidity allows for accurate evaluation of the vehicle's performance, and any issues can be identified and addressed before the vehicles are shipped to the market.
Automotive research and development teams use the test chamber to explore new technologies and materials. For example, they can study the performance of new battery technologies under different temperature and humidity conditions, or the effectiveness of new insulation materials in reducing heat transfer. The ability to control the environmental conditions precisely enables in - depth research and the development of innovative solutions to improve vehicle performance and efficiency.
Our large - capacity automotive temperature humidity test chamber for whole cars is a vital tool for the automotive industry. With its large - capacity design, precise environmental control, real - world scenario simulation, comprehensive monitoring and data logging, durable construction, and safety features, it provides a comprehensive and reliable platform for automotive manufacturers to test, evaluate, and improve their vehicles. Whether it's for new vehicle development, component testing, quality control, or research and development, this test chamber is an essential asset for ensuring the performance, durability, and competitiveness of automotive products in the global market. Contact us today to learn more about how our product can meet your automotive testing needs
Your message must be between 20-3,000 characters!
